the adjustable version of these rings available here
you will need:
1. wire -- I used 20 gauge half hard sterling silver wire -- probably 1 foot of wire should be enough
2. pliers -- I used metal flat and round nose pliers but you could use non-marring pliers if you don't want your pliers to leave marks
3. ring mandrel
4. mallet
diy:
step 1:
shape the letters one at a time for your first ring
step 2:
wrap your ring around your ring mandrel according to your desired size and cut the wire 1/4" longer than the desired length -- leave ever more wire if you think you'll need to do more size adjustment
step 3:
make a loop at one end of the wire and another loop at the other end of the wire -- this is where the extra wire comes in handy. link these loops together while the ring is on the mandrel to make sure you achieve your desired ring size
step 4:
gently beat ring with mallet while it is on the mandrel -- this will help harden the metal so that the ring keeps its shape
step 5:
repeat steps 1-3 for your second ring
